Home Design Crackle Paint 90 ml

Single-component lacquer for the three-dimensional, relief-like design of many solid surfaces such as wood, paper, cardboard, canvas, stone, glass, ceramics, porcelain, terracotta, plastic and Styrofoam.

The paint is lacerated into facets while drying.

The paints are produced on water-base and are of creamy, drip-proof, spatula suitable consistency.

Mixable with each other, light fast.

Color paints dry with a glossy finish.

Suitable for stenciling and for creative home design.

Creative advice:

- Surface should be dust and grease-free.

- Stir Crackle Paint and Contact Primer well before use!

- Use paints undiluted.

- Depending on the surface, first apply an undercoat for smooth, non-absor-

bing surfaces (e.g. glass, porcelain) or an undercoat for absorptive surfaces

(e.g. wood, canvas, cardboard). After drying, apply the Crackle Paint with

a spatula to a layer thickness of no more than 2 mm. The layer thickness

should be no thinner than 1 mm and no thicker than 3 mm.

- After drying time of 24 to 48 hours the pronounced facet effect evolves.

- Do not dry the Crackle Paint too quickly: Do not place on a heater for drying

or blow dry.

- Apply Crackle Paint with a spatula

- Evenly apply Contact Primer for Crackle Paint with a soft, flat synthetic

brush

- Clean the utensils with clear water before they start drying